AMT 626 want start when engine hot
abcdefghijkl
Join Date: Aug 2009 Posts: 4 Bassfield, Ms. |
2009-08-04 164636
I have an AMT 626 Old model gator, I think a 1990 model.Engine # FE290D066524; It starts pretty good when cold by chocking it.When the engine gets hot it doesn't want to start. One small engine mechanic told me that the engine was shot. I have talked to others that says it isn't. It does not use any oil and runs good once started. Can anyone give me any advise as to what could be wrong?
Reply to | Quote Reply | Add Photo
AMT 626 want start when engine hot
gatoraider
Join Date: Nov 2008 Posts: 544 Maryland |
2009-08-04 164646
Alphabet Soup, you sure didn't put much thought into that one. There is an ignitor on top of your motor, about one inch square, silver, that has a black wire going into it. There is an insulator under it that shields it from engine heat. Sometimes the insulator gets taken out or maybe it's been in there too long and is not working properly. Or possibly the ignitor is going bad. That's where I would look first. Make sure your spark plug is in tight also. ....
Reply to | Quote Reply | Add Photo
AMT 626 want start when engine hot
abcdefghijkl
Join Date: Aug 2009 Posts: 4 Bassfield, Ms. |
2009-08-05 164683
You are right about the User ID not much thought went into it. Thanks for the information I will try this and see if it works. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This